LuxPower SNA5000 48v OFFGRID 5kva Inverter HYBRID

Free shipping on orders over $50!

  • Check Mark Satisfaction Guaranteed
  • Check Mark No Hassle Refunds
  • Check Mark Secure Payments
Category:

Description

The LuxPower SNA 5000 is one of the best off-grid inverters on the market. This inverter meets all the requirements we feel is important in an inverter of this type. With two high voltage MPPT’s and a max PV input of 6000 Watts, compatibility to communicate with a wide range of lithium batteries and full off-site monitoring via an App it is hard to beat this unit at this price point.

Key Features

  • Intelegent Off-Grid & Hybrid modes
  • PV and AC Power can power loads simultaneously
  • 2 x MPPT’s with wide input voltage range.
  • BMS comunication to most leading brands of Batteries (See List)
  • Free monitoring via app and remote upgrades.
  • Single or unbalanced three phase
  • Parallel up to 10 units.
  • Independent generator interface.

Battery Compatability list

  • BYD
  • Dyness
  • PylonTech – The PylonTech protocol is used by almost all DIY BMS so that is very likely the protocol you can use with your Battery.

 

  • SNA 5000 WPV
  • Battery operating voltage: 48-60VDC.

Inverter Output

  • Waveform: Pure Sine-Wave.
  • Rated Power: 5000VA/5000W.
  • Parallel Capability: Yes, 9 units.
  • AC Voltage Regulation (Battery Mode): 230VAC ± 5% @ 50/60Hz.
  • Surge Power: 10000VA.
  • Efficiency (Peak): 93%.
  • Transfer Time: 10 ms (For Personal Computers); 20 ms (For Home Appliances).

Solar Charger

  • Maximum PV Array Power: 6000W.
  • 2 MPPT Controllers
  • MPPT Range @ Operating Voltage: 120VDC ~385 VDC.
  • Maximum PV Array Open Circuit Voltage: 480VDC.
  • Maximum Efficiency: 98%.
  • Maximum Solar Charge Current: 100A.

AC Charger

  • Charge Current: 60A.
  • AC Input Voltage: 230 VAC.
  • Selectable Voltage Range: 110-280 VAC (For Personal Computers); 90-280 VAC (For Home Appliances).
  • Frequency Range: 50Hz/60Hz (Auto sensing)

Build in BMS (Battery management System)

  • Pylon
  • Dyness
  • BYD

Wifi Remote Monitoring

Flexible Working Modes with settable charge and load power supply priority

Recommended setup

AC
25A Input breaker
20A Output breaker
Changeover Switch

Solar MPPT

Fuses or Circuit Breakers on both + and –
120-385v 13A per MPPT
SPD 500A
Isolator Switch or DC Circuit Breaker

Battery
35MM-50MM Cable. Depending on length.
125A Fuses OR High-Quality DC Circuit Breakers